Flooring Installation in Toronto & Mississauga

Good flooring installation in Toronto and Mississauga starts below the boards, with a flat, sound subfloor. Artifex Reno supplies and installs hardwood, vinyl plank (LVP) and other floor types in single rooms or right through a home, with the prep, transitions and trim done by the same crew that lays the floor.

Get a free estimate or call 647 223 4051.

Dark wide-plank hardwood floor in a finished Toronto condo with floor-to-ceiling windows

What's included

  • Flooring supplied by us, so material, prep and installation sit in one written scope.

  • Subfloor preparation, including subfloor and framing repair where it is needed, so the finished floor sits flat.

  • Hardwood flooring, laid with straight starting lines and tidy cuts at the edges.

  • Vinyl plank (LVP) flooring for rooms where you want a durable, water-resistant surface.

  • Patterned floors and inlays, such as parquet with borders and inset details.

  • Flooring through several rooms, with continuous runs through doorways.

  • Transitions, baseboard and trim, so the new floor meets doors, stairs and walls cleanly.

  • Tile floors. See tile installation.

Hardwood flooring

Hardwood gives a room warmth and a clear direction. Long boards lead the eye down the room, which is why straight starting lines and careful cuts at walls and doorways matter so much: they are what make the whole floor look calm. Dark, wide planks in particular show every low spot and ridge under daylight, so the subfloor has to be flat before the first board goes down.

We install hardwood in single rooms, condos and through connected rooms across a whole floor, including patterned and parquet layouts.

Installer laying dark hardwood planks in a Toronto condo with skyline windows

Vinyl plank (LVP) flooring

Vinyl plank, often called LVP or luxury vinyl plank, suits basements, kitchens, entries and other busy rooms where you want the look of wood with a surface that handles moisture and wear well. Like hardwood, it depends on what is underneath: vinyl is thin enough to show bumps and dips in the subfloor, so we prepare and level the base before the planks go down, then finish with clean transitions and trim.

Patterned floors and inlays

Some floors are the feature of the room. Parquet with borders and changes of direction gives a surface a deliberate rhythm, and an inlay set into the boards becomes a quiet detail you notice every day. Floor inlays are part of our custom millwork work, laid out before they are cut, because once a shape is cut into a finished floor there is very little room to change it.

Eight-point star inlay outline marked on dark hardwood before cutting
Pale eight-point star inlay set into a dark hardwood floor in Toronto

How flooring installation runs

  1. Walkthrough. Nazar visits, measures and checks the existing floor and what is under it.

  2. Fixed written scope. You receive a written scope with materials, timeline and price. The number you approve is the number you pay.

  3. Prep. Old flooring comes up where needed and the subfloor is repaired and levelled.

  4. Install. Boards or planks go down from straight starting lines, with careful cuts at walls, doorways and stairs.

  5. Trim and handover. Transitions and baseboard are fitted, and we do a final walkthrough against the original scope, line by line.

Get a free estimate for your floors

The floor type, the area, the layout and the condition of the subfloor all shape a flooring job, so we price each one from a walkthrough. Nazar visits, measures and checks what is under the existing floor, then you receive a written scope with materials, timeline and price before any work starts.

Get a free estimate or call 647 223 4051.

Flooring work from our projects

Why homeowners choose Artifex Reno

Artifex Reno is run by Nazar Popov, based in Mississauga and working across Toronto and the GTA, with more than 700 projects over 11 years. One crew, no sales layer, $2,000,000 in liability insurance and WSIB clearance.

Frequently asked questions

Should I choose hardwood or vinyl plank? Hardwood suits living areas and bedrooms where you want natural wood. Vinyl plank suits basements, kitchens, entries and other rooms that see moisture or heavy use. We can talk through the options for each room at the walkthrough.

Can new flooring run through several rooms? Yes. Continuous flooring through doorways makes connected rooms feel like one space. Transitions and trim are planned in the scope.

Do you install flooring in condos? Yes, we have installed hardwood in condo units. Building rules vary, so check yours before the work is scheduled.

What happens if my subfloor is uneven? It is prepared before the new floor goes down. Subfloor repair and levelling are written into the scope so there are no surprises.

Do you supply the flooring? Yes. We supply the flooring as well as install it, so the material, the subfloor prep and the installation are all set out in one written scope. We can talk through hardwood and vinyl plank options for each room at the walkthrough.

How long does flooring installation take? For most homes, installing hardwood or vinyl plank takes about 1 to 3 days on site. Patterned floors, stairs and subfloor levelling add time, and hardwood needs time to adjust to your home before it goes down. Your exact schedule is confirmed in your written scope.

How much does flooring installation cost? It depends on the floor type, the area and the subfloor. After the walkthrough you receive a written scope with the exact price before any work starts. Get a free estimate.

Start with a walkthrough

Tell us which rooms you want to redo. Get a free estimate or call 647 223 4051.

Related: All services · Tile installation · Basement renovations · Kitchen renovations · Projects